Flueboost 150 Inline Chimney Fan (Boilers <44kW)

Flueboost 150 Inline Chimney Fan (Boilers <44kW) It will handle flue gases at up to 200 Deg C and boilers with heat outputs up to 150,000 Btu/h; 44Kw. If fitting to a gas fire consult the manufacturer first. The motor is a single speed external rotor complete with secondary cooling impeller and class F windings, the bearings are maintenance free sealed ball bearings with adequate lubrication to ensure reliable operation for many years. Two plug-in electrical connectors are supplied; a three pin socket for the power supply, and a three pin plug for the output supply. NOTE:- The output supply is 220/240 volt switch live only. The pressure switch has contacts which close with air flow and open in the event of a fan failure. NOTE:- The pressure switch has an interlock installed which ensures failsafe operation. The fan has a built in pre purge (time delay) of approximately 30 seconds; this is to purge the boiler system of any gases before boiler ignition. Gas fire models have no pre purge. The units are constructed out of 1.2 mm mill finish 304 stainless steel. 220/240 Volt; single phase; 43 watt. Starting current 1.2 Amp. Running current 0.19 Amp. Fan fuse 3 Amp